HakPak Series 1
Updated 2015-01-01

COUNT		PART #			DESCRIPTION
1x			PL2303HX		Generic USB-to-serial cable
1x			LPC1114FN28		NXP Semiconductor ARM Cortex-M0+ microcontroller in a DIP-28 package (DKPN 568-10143-5-ND)
1x			LM567			Touch Tone decoder and frequency synth
2x			L78L05ACZTR		TO-92, 100mA +5VDC linear voltage regulator
2x			L78L33ACZ		TO-92, 100mA +3.3VDC linear voltage regulator
4x			2N3906TF		TRANSISTOR PNP 40V 200MA TO-92 (DKPN 2N3906TFCT-ND)
4x			2N3904-AP		TRANSISTOR NPN 40V TO-92 (DKPN 2N3904-APCT-ND)

1x			S875-16R 4F		Hamamatsu ceramic base Si photodiode 
4x			RI-29 			Miniature magnetic reed switch
4x			N/A				Tactile push-button switches, right angle 
1x			N/A				Magnetic pickup coil
1x			N/A				(Surplus) Board from battery charger; pogo contacts, EEPROM

4x			MIM 5383H4		38kHz infrared receiver (PIN photodiode, decoder), TV remote receiver
4x			IR1503			Everlight Electronics Co Ltd 5mm Infrared LED (DKPN 1080-1071-ND)

1x			N/A				1x40 0.1" header
1x			N/A				DIP-28 socket
1x			N/A				1 7/8" X 2 1/4" perf board
1x			N/A				2-AA battery holder with snap contacts
2x			N/A				Battery snap contacts for 9V battery

1x			N/A				Packet of assorted LEDs
5x			N/A				0.1uF 100V ceramic capacitors
3x			N/A				2200uF 25V radial electrolytic capacitors
8x			1N4450			Small Signal Switching Diode (Rohm)
1x			N/A				Assortment of 1% resistors (approx. 50)

1x			N/A				Approx 10"x1" strip of dual sided peel-and-stick foam pad
1x			N/A				Approx 5"x1" strip of dual sided peel-and-stick foam pad
1x			N/A				Kapton/polymide tape, 10mm x 30m roll
2x			N/A				Cylindrical neodymium magnets, 8mm x 10mm, N35 grade